Arbor mounting Designation Design D D1 D2 D3 L L1 Screw Washer Coolant Weight kg HSK50A-FMB22C-60 A 48 22 16 – 60 18 E100U300 – Through 0.90 HSK63A-FMB16C-100 A 35 16 13 – 100 16 E080U300 – Through 1.80 HSK63A-FMB22C-50 A 48 22 16 – 50 18 E100U300 – Through 1.00 HSK63A-FMB22C-100 A 48 22 […]
HSK-A Face Mill Holders Read More »
JIS B 6339 with coolant through A/AD/B from DIN (ISO 7388-2-J/JD/JF) The B through coolant design of ADB holders is made according to DIN 69871-B. Machine side d1 d2 d4 d5 d7 d9 e1 u l1 l6 l9 b y BT30 A/AD mm 31.75 12.5 38 46 M12 – – 22 48.4 16.3 11 16.1
BT JIS Norm Dimensions Read More »
DIN 69871-A/AD/B (ISO 7388-1-A/AD/AF) and CAT-A/AD/B (ISO 7388-1-U/UD/UF) DIN/ CAT (Combined) indicate these holders of the DIN 69871 range feature the fixed diameter d3 of the ANSI B5 50/CAT norm (full ANSICAT conformity restricted by timing notch inclusion and metric pull-stud thread). Machine side d1 d3max d4 d5 l1-0.2/0 d7 6H d2 H7 d9 e1
DIN 69871 Norm Dimensions Read More »
ISO 12164-1-HSK-A HSK-A is a lighter weight tool compared to ISO-tapers and offers high consistency in terms of radial and axial accuracy. Machine side d1 d2 d9max d3 d10 d4 f1 f2 f3 l1 l2 l3 l4 b1 b2 b3 h1 h2 h3+0.2 HSK – A32 mm 32 24 26 17 26.5 20.5 20
HSK-A Norm Dimensions Read More »
① ② ③ – ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ Boring bar – Metric S 32 T – S C L C R 12 ① Toolholder type A = Solid steel bar with internal coolant supplyE = Carbide shank barF = Damped, carbide shank barS = Solid steel bar without coolant supply ② Shank
The ISO designation for internal turning tools Read More »
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ Shank Tool – Metric M C L N R 25 25 M 12 ① Insert clamping Cclamp on top of insert Dclamp on top of insert and into hole Mtop and through hole clamping Pclamp with pin through hole Sclamp with screw through hole W
The ISO designation for external turning tools Read More »
The cutting tool material used for cutting must have sufficient hardness (The basic requirement that the cutting material is harder than the workpiece material.), toughness (Needed to prevent breaking and crack formation. Is equivalent to the flexural strength of the material under the conditions that are present, together with its break resistance. Toughness is highly
Cutting Tool Materials Read More »
The ISO designation system (ISO 1832) standardizes the naming of indexable inserts, representing each important feature and dimension using a code system. This unique code becomes the insert’s name. Unique naming of indexable inserts, independent of the supplier. Clear inclusion of all important features and dimensions in the name. Some code positions correspond to the
The ISO designation for Inserts Read More »
Aluminum alloy is an alloy primarily composed of aluminum as the base metal with the addition of certain amounts of other alloying elements. The main alloying elements include copper, silicon, magnesium, zinc, and manganese, while the secondary alloying elements include nickel, iron, titanium, chromium, lithium, and others. Aluminum alloys have a low density (approximately 2.63-2.85
IT grade(s) refer to an internationally accepted code system for tolerances on linear dimensions. Such code systems may be used to produce interchangeable parts. In engineering, the word tolerance refers to a range of allowable dimensions or values. Standard tolerance grades are a group of tolerances for linear sizes characterized by a common identifier. For
Grades of International Tolerance Read More »
